The bed is best grain grade 25 cast iron casting. It is well ribbed to provide rigidly and the bed is designed for smooth and easy chip flow and removal.
X and Z-axes features precision ball screws supported in both ends. To ensure stability and fully protected the guide ways are well spaced. Automatic metered lubrication is provided to all the Guide ways and ball screws.
The spindle is assembled and tested in the controlled clean AC room, the super precision angular contact bearings are used in front and rear of the spindle. The bearings are grease lubricated for longer life.
TAIL STOCK :
The tail stock is supported on V and flat guide ways.
ELECTRICAL SYSTEM :
The electrical elements uses in the machine are of highly reliable and globally accepted and sub systems, siemens CNC systems, siemens AC digital spindle motor with controller and siemens axes motor with controller are offered of standard products.
Key Features RGT-165
- Heavily Ribbed and finitely analysed structure for best vibrational damping.
- Rigid Single Piece Mono Block 30degree Slant Saddle construction.
- Bi-Directional high Speed Servo Turret.
- Heavyduty Spindle Head and Rigid Tail Stock.
- P Class Roller L.M. Guideways.
- Hydraulic Chucking and Tail Stock.
- Axis Movement through P class preloaded Ball screw.
- Cartridge type Super precision spindle.
- Efficient Chip Disposal.
- Centralised Auto Lubrication system.
STANDARD FEATURES ACCESSORIES:
- AC spindle motor
- AC Servo Digital Drive for axis
- L.M. Guide ways
- Hydraulic Chuck
- 8 St. Bi-directional SERVO Turret
- 3 nos. Boring bar holder
- 1 nos. Facing tool holder
- Auto & Manual Coolant System
- Centralized & Programmable Lubrication
- Electrical with quality devices & panel withA. C.
- Tail stocks with live center
- Set of Sleeves
OPTIONAL ACCESSORIES :
- Chip Conveyor with Chip Bin
- Vibrating pads
|Swing Over Bed||300 mm|
|Swing Over Carriage||165 mm|
|Distance Between Centers||350 mm|
|Maximum Turning Dia||200 mm|
|Maximum Turning Length||325 mm|
|Spindle Nose||A2 - 5|
|Spindle Taper||MT - 5|
|Spindle Bore||52 mm|
|Maximum Bar Capacity||38 mm|
|Chuck Size||165 mm|
|Front Bearing Bore||80 mm|
|Spindle Moor||7.5/9 kw|
|Speed Range||0-3500 rpm|
|Full Power Speed Range||700-3500 rpm|
|X - Axis Travel||100 mm|
|Z - Axis Travel||350 mm|
|Rapid Traverse (X - Axis)||20 mtr / min|
|Rapid Traverse (Z -Axis)||20 mtr / min|
|Ball Screw Dia. (X - Axis)||32 x 10 mm|
|Ball Screw Dia. (Z - Axis)||32 x 10 mm|
|Z Axis Drive||6Nm|
|X Axis Drive||6Nm|
|Quill Diameter||63 mm|
|Quill Stroke||100 mm|
|Taper in Quill||MT-4|
|Tail Stock Base Travel||200 mm|
|No of Stations||8|
|Maximum Boring Bar Dia.||40 mm|
|Tool Cross Section||25 mm|
|Dimensions (Aprx.)||2750 x 1600 x 1600|
|Weight (Aprx.)||3000 kg|