BED :
The bed is best grain grade 25 cast iron casting. It is well ribbed to provide rigidly and the bed is designed for smooth and easy chip flow and removal.
AXIS :
X and Z-axes features precision ball screws supported in both ends. To ensure stability and fully protected the guide ways are well spaced. Automatic metered lubrication is provided to all the Guide ways and ball screws.
SPINDLE :
The spindle is assembled and tested in the controlled clean AC room, the super precision angular contact bearings are used in front and rear of the spindle. The bearings are grease lubricated for longer life.
TAIL STOCK :
The tail stock is supported on V and flat guide ways.
ELECTRICAL SYSTEM :
The electrical elements uses in the machine are of highly reliable and globally accepted and sub systems, siemens CNC systems, siemens AC digital spindle motor with controller and siemens axes motor with controller are offered of standard products.
Key Features RGT-150
- Heavy structure and finitely analysed structure for best vibrational damping.
- Rigid Single Piece Mono Block 60degree Slant Saddle construction.
- Slant Bed With T-Slot.
- Heavyduty Spindle Head.
- Precision Class Roller L.M. Guideways.
- Hydraulic Chucking.
- Axis Movement through Precision class preloaded Ball screw.
- Cartridge type Super precision spindle.
- Efficient Chip Disposal.
- Centralised Auto Lubrication system.
STANDARD FEATURES ACCESSORIES:
- AC spindle motor
- AC Servo Digital Drive for axis
- L.M. Guideways
- Hydraulic Chuck
- Auto & Manual Coolant System
- Centralized & Programmable Lubrication
- Electrical with quality devices & panel with A. C.
- Set of Sleeves
OPTIONAL ACCESSORIES :
- Chip Conveyor with chip Bin
- Stabilizer
- Vibrating pads
| CAPACITY | |
|---|---|
| Chuck Size | 160 mm | Max turn length | 300 mm | Std turn diameter | 150 mm | Max turn diameter | 150 mm | Slant angle to horizontal | 60kg |
| SPINDLE | |
| Bar capacity | 38 mm |
| Spindle nose | A2-5 |
| Hole through spindle | 52 mm |
| Spindle speed range | 32 – 4000 rpm |
| Spindle motor | 7.5 / 11kw |
| AXIS SLIDES | |
| X axis Stroke | 300 mm | Feed motor | AC servo/6 Nm | Feed rate | 1-5000mm/min |
| Rapid rate | 20000mm/min |
| Ball screw dia and pitch | 32 x 10P |
| Linear guides | 32 mm |
| Min Resolution | 0.001 mm |
| Z AXIS | |
| Z axis stroke | 300 mm |
| Feed motor | AC servo / 6 Nm |
| Feed rate | 1-5000 mm / min |
| Rapid rate | 15000 mm / min |
| Min resolution | 0.001 mm |
| Ball screw dia and pitch | 32 x 10P |
| Linear guides | 32 mm |
| TOOLING | |
| Gang type tooling | |
| Tool shank Sq. | 20/25 mm |
| Tool shank round | 32 mm |
| GENERAL | |
| Dimensions(approx) | 2300 x 1560 x 1900 mm |
| Weight (approx) | 2000 kg |